Language
info@ibuildingproducts.co.uk +44 (0)1943 607538

Roof repair with Flexim Roof Putty

Repairing fixed ridge caps with a porous cement layer

PREPARATION

Carefully remove all sections of porous cement using a hammer and a stone chisel. Allow a minimum of 3 cm adhesion space for the application of the Flexim.

Installing or securing side wall tiles

PREPARATION

Ensure a clean, dry foundation.

Repairing torn lead flashing

PREPARATION

The torn lead flashing and the foundation must be clean and dry.

Adhering tiles or tile pieces to valleys

METHOD

Using the gloves provided, remove a Flexim strip from the packaging and position it squarely where the tile section is to be applied.

Waterproof sealing of corrugated roofs

METHOD

Fill the corrugation rebates between the frame and the corrugated sheeting with Flexim.

METHOD

Using the gloves provided, remove a Flexim strip from the packaging. With the aid of a trowel or spatula push the Flexim down into the space that has been cleared for adhesion.

METHOD

Using the gloves provided remove the Flexim strip from the packaging and apply to the outside wall.

METHOD

Using the gloves provided, remove a Flexim strip from the packaging and apply it to the underlying roof construction beneath the torn lead.

Press the tiles firmly down into the Flexim. Smooth out the Flexim until an even finish is achieved.

Apply the Flexim between the ridge piece and the corrugated sheeting.

Apply the side wall tiles to the outside wall.

Press the side wall tile firmly down into the Flexim.

Copyright © by iBuilding Products - Design & Development by Syvo Home  The Company  Projects  Contact  Sitemap

Scroll to Top